Introduction to FOREX

The FX Market
The Foreign Exchange market which is often referred to as the "Forex" or "FX markets" is the largest, most liquid, most transparent financial market in the world. Daily average turnover has now exceeded 2 trillion USD. All the U.S. equity markets combined do not reach 3% of the total volume traded on the FX market.
Unlike other financial markets, where for the most part you can only profit in rising markets, in the FX market whenever one enters into a position he is long (bought) one currency and short (sold) another currency simultaneously which means as opposed to other cyclical financial markets in the FX markets there are endless opportunities.

Basic Concepts
The term Foreign Exchange means the transferring of one currency into another simultaneously. Since currencies are traded in pairs, to profit from an exchange rate move you need to buy the currency that you expect will strengthen and sell the other. For example if you believed that the Euro (EUR) was going to appreciate against the dollar (USD) you would buy the EUR/USD; or in other words buy the EUR and sell the USD. Alternatively, if you believed that the EUR was going to depreciate against the USD then you would sell the EUR/USD; or sell the EUR and buy the USD.
As can be seen there is no need to wait for a bullish market to profit, for at any given moment, one currency will be strengthening against another. The FX market is therefore constantly producing opportunities to invest.

Who Trades in the FX Market?
Foreign exchange traders can be separated into two groups, hedgers and speculators.
Hedgers: Governments, companies (exporters and importers) and some investors have foreign exchange exposure. Adverse movements between their local or domestic currency and the foreign currency of the group they are either doing business with (for the exchange of goods and services) or investing in will affect their bottom line. This is the core of all foreign exchange trading; however it only makes up approximately 5% of the actual market.
Speculators: These groups which range from banks, funds, corporations and individuals – create artificial rate exposure in order to profit from the variations or movements in the price.

Currency Pairs
Currency Pairs: Each currency is recognized by a three letter code. For example EUR (is the EURO and refers to the European currency), USD (is the United States Dollar). The worlds leading currencies (often referred to as the majors) are the EUR, USD, JPY (Japanese Yen), GBP (the British Pound or Sterling), CHF (the Swiss franc), AUD (the Australian Dollar) and the CAD (the Canadian Dollar).
Currencies are traded in pairs and are displayed as such. There is always the three letter currency code a slash and another three letter currency code. The first currency displayed refers to the "base", "leading" or "primary currency"; the second currency refers to the "secondary currency".

For instance when looking at the EUR/USD the EUR is the leading currency and the USD is the secondary currency. The "currency pair" or "currency cross" is then followed by a number; this is typically a five digit number with a decimal point after the first, for instance 1.2660.
The number represents the ratio of one currency against the other, and can be read as "the amount of the secondary currency needed in order to have one unit of the major currency". In the example just given, EUR/USD 1.2660, one would require 1 Dollar and 26.6 cents to exchange for 1 Euro.

Bid and Ask or Buy and Sell
There are always two numbers given after the currency pair, the first always has a smaller numerical value then the second. This can once again be shown using the same example (EUR/USD 1.2660 1.2663). The first number is known as the "Bid" or "Sell" and the second number is known as the "Ask", the "Offer" or "Buy".
The smaller number or the Bid (Sell) (1.2660) represents that price where one can sell the major currency and buy the secondary currency; sell the EUR and buy the USD. The second price the Ask (BUY) (1.2663) represents the price where one can buy the major currency and sell the secondary; buy the EUR and sell the USD.
In the trading window below the trader is able to buy the EUR against the USD at 1.2847 or sell the EUR and buy the USD at 1.2844. The trader is also able to buy the USD against the JPY at 117.60 and sell the USD and buy the JPY at 117.57.

Calculating your P&L
As discussed above the foreign exchange rate represents the value of one unit in the major currency in the terms of a secondary currency. Since when opening a trade you exercise the trade in a set amount of the major currency and when closing the trade you do so in the same amount, the profit or loss generated by the round trip (open and close) trade will be in the secondary currency.

For example if a trader sells 100,000 EUR/USD at 1.2820 and then buys 100,000 EUR/USD at 1.2760, his net position in EUR is zero (100,000-100,000) however his USD is not. The USD position is calculated as follows 100,000*1.2820= $128,200 long and -100,000*1.2760= -$127,600 short. The profit or loss is always in the second currency. For simplicity's sake the P&L statements often show the P&L in USD terms. In this case the profit on the trade is $600.
As can be seen from the Open position window below in Ticket number 411 the trader has Bought 20,000 EUR against the USD at 1.2806 the current rate to close is 1.2844, therefore the trader has a current profit of 38 pips and 20000*0.0038= $76.

A Pip
We can see that in this case the trader made 60 points or pips. This is calculated as follows 1.2820-1.2760=0.0060; therefore 1 pip=0.0001 and on a 100,000 EUR/USD position 1 pip is worth $10. In a USD/JPY position where the market rate is 118.30 one pip is 0.01. We can therefore see that a pip is equal to the last decimal point shown on a rate. The value of 1 pip in USD/JPY for a 100,000 position can be calculated as follows: 100,000*0.01= 1,000 JPY, in USD terms this is equal to 1,000/118.30= $8.45 (rounded to the nearest cent).

Orders - Stops and Limits
As in other financial markets, one can enter the foreign exchange markets at the market or deal rate (this is often known as a Market Order) or at a future rate this is known as a Stop (often known as a Stop Loss) or Limit Order. However as opposed to other financial markets, placing orders in the FX market is much easier, gives far better results and has many more opportunities and variations on the order placed.

When you wish to enter into a trade at current market conditions one simply executes a buy or a sell market order. Often a trader may wish to either limit the loss of the position that he has open (in which case he is able to set a stop order) or he may wish to enter a trade but at a rate that is more attractive then the current market (in which case he can place a limit order).
As discussed above, a stop order can be placed on an existing open position to limit the possible loss on the open trade. For instance say if a trader is long 100,000 EUR/USD at 1.2820, he is obviously expecting that the EUR/USD rate will rise where he will be able to get out at a profit. However the trader may wish to limit the loss that he is willing to take on the trade. If the maximum loss the trader is willing to take is $1,000 and he knows that every pip is worth $10 in this case, calculated by 100,000 EUR*0.0001= $10, then he will want to set his stop order 100 pips from his execution price in this case 1.2720. At 1.2720 the client will lose $1,000 if it is not closed earlier and the AVA platform will execute the order if and when the Bid (since in this case the stop order is a sell order) reaches the stop rate of 1.2720.

Orders – O.C.O's, I/D's and Trailing Stops
As mentioned above there are many combinations of orders that are possible to you in the FX market and in the AvaTrader platform. Stop and Limit orders as described above are the basic orders available, all the rest are simply a combination of them or contingent orders.

O.C.O's
O.C.O's is short for "One Cancels the Other". This is used against an open position, and is done in the following way; the trader places a stop order and a limit order against an existing open position, the first one that hits closes the position (a loss if the stop order hits and a profit if the limit order hits) and when the trade is closed the remaining order is cancelled.
This can best be described by an example. Say the trader is short 250,000 AUD/USD at 0.7730 and he wishes to profit $1,250 USD but is only willing to risk losing $750 USD, then he would place the following orders. The trader would set a limit order 50 pips away from the execution price since 50 pips at $25 per pip is $1,250USD; therefore the limit order would be placed at 0.7680 at the same time the trader sets a stop order 30 pips from the executed open price since 30 pips at $25 per pip is $750US; therefore the stop order would be 0.7760. The orders would be placed O.C.O which means that one order can be hit or triggered to close the open position and when that occurs the remaining order is cancelled automatically.

I/D's
I/D's is short for "If Done". This is a spin on the O.C.O, where the O.C.O is placed on an existing trade, the I/D is placed on a trade that has not yet been exercised. This can best be shown by an example. Say the trader wishes to go short on the AUD/USD at 0.7770 in 250,000 AUD but the bid price is currently only 0.7730. Now as above the client wishes to profit $1,250 USD but is only willing to risk losing $750 USD; then he would place the following orders. The trader would set an original limit to sell the 250,000 AUD/USD at 0.7770 and place another limit that becomes active if the first limit hits (hence the term If Done).
The I/D order can also have a stop order attached as above, if the trader would like to set the same conditions as the O.C.O order above i.e. 50 pip profit and 30 pip loss then the full order would read as follows: Sell 250,000 AUD/USD at 0.7770 I/D 0.7720 Limit and 0.7800 Stop.
Below we can see an actual I/D order with a combination O.C.O on the Orders worksheet where in Order number 205 the trader wishes to buy 20,000 EUR against the USD at 1.2680 if this occurs then there is a stop order against it at 1.2670 (a maximum loss of 10 pips) and an O.C.O limit of 1.2790 for a profit of 110 pips.

Trailing Stops
A Trailing Stop is an active stop loss that keeps a set distance away from the current market price and updates according to the market. This is best used in a moving market that is going in the direction the trader wants and the trader wishes to guarantee the profits made. This can be best illustrated by an example.
Say a trader enters into a long 200,000 USD/CHF position at 1.2430 and set a stop order at 1.2380 with a trailing stop of 50 pips. The maximum the trader can lose is 50 pips as above, however the stop loss will automatically update itself as the market moves. For instance, if the market moves to 1.2450 then the stop loss would update itself to 1.2400, always keeping 50 pips from the maximum rate; the stop loss will keep updating itself until it triggers or the original trade is closed.

Hedging Trades
On the AvaTrader platform, traders have the opportunity to hedge their positions. A hedge is a trade that is in the opposite direction of an existing trade or open position. This can be a partial or a full hedge and does not close the position although it has the same affect. Some traders enjoy this feature and capability to hedge an open trade rather then close it out as part of their trading strategy. It should be noted that a hedge has the same affect as closing or partially closing an existing trade except for the fact that both the long and the short positions remain in the open positions table, are treated as open trades and must be closed at a later date.

Rollovers
On the AvaTrader platform all open positions are automatically rolled or swapped to the next business day. Traditionally all spot trades in the FX market are performed for a period of two working days when the delivery of the transaction is to take place. Since Ava through its AvaTrader platform does not permit delivery trades all trades must eventually be closed. Hence in order to avoid the delivery of the trade, the positions are automatically closed for the original trade date and reopened for the next trade date. In order to keep things simple and give a maximum advantage to its clients the open and close rates of the roll are kept the same as the open position rate. A premium is then either added or subtracted based on the interest rate differential between the two currencies being traded.
This is a very beneficial and time saving method to continue the trade on the traders behalf until such time as the trader decides to close the trade.

Technical Analysis – an Introduction

Technical analysis is the study of market data such as historical and current price data and volume in an effort to forecast future market activity. Historical price data is the most commonly used available data that is implemented into the analysis.
Historical market data is saved and forms charts over various periods of time. The technical trader can analyze varying periodical charts over a specific length of time for the basic purpose of picking the entry and exit levels of a trade. By studying the chart the chartist is able to get information at a glance that will hopefully represent the direction of the instrument in the future.
There is a never ending argument between fundamentalists and technical analysts about which method of analysis will show the best results. Technical analysts will claim that all the fundamentals are already built into the price, and so apart from natural disasters and unexpected world events the current price shows the market's expected value taking all the known information into consideration. The chartists are in fact looking for patterns or repetitions in price movements to guess the likely outcome of future prices – in a word they are looking for trends. Technical analysis assumes three main points,
1. Fundamentals are already built into the price
2. History has a habit of repeating itself – find what happened in the past and project it into the future.
3. Trends are key – establish whether the instrument is moving in a trend, and then follow it. Typically there are three variations upward, downward or side wards. Once the type of trend is established an entry point is picked for the commencement of the trade.
Over the years various mathematical manipulations were placed upon market prices and volumes. Theses manipulations (known as studies) helped the technical analyst focus on identifying the trend and the entry and exit levels.
As with any analysis, discipline is the most important aspect of the study. If your studies showed that something was to occur, then follow your studies – do not let the market change your plan. If you were wrong then you were wrong, but stick to your game plan. (see Technical Trading Tips and Guide to Trading for helpful hints to trade).


Charts - Types
There are three main types of charts, line, bar and candle.
Line charts are the most basic and simply join one period closing price to another.
Bar charts give more detail then a regular line chart in that each period is represented by a bar. The bar not only shows price movements from one period to the next, they also show price movements within the period itself.
Candlestick charts. These are very similar to bar charts except there colored bodies are able to give the viewer greater detail in movements within the period at a glance. Each period is made up of a candlestick – the candlestick is made up of a body and a wick on both ends. The candle body is then colored (typically red and either blue or green). The wick represents the high and low of the period, while the body represents the open and close of the period, the color lets us know if the price rose or fell in that period. If the candle body is red then the top of the candle represents the opening price and the bottom the closing, a green or blue candle would represent the opposite, the top of the candle would be the closing while the bottom would be the opening.



Periods
Charts are viewed as a sequence of periodical prices. The fastest moving chart is a tick chart. Tick charts can only be seen in a line format since the low, high, opening and closing price during that period are one and the same. Every point on the chart represents one tick or one price quote. The next period is usually a 1 minute chart and then periodically higher 5 min, 10 min, 30 min, 1 hour, 4 hour, daily, weekly and monthly.
The longer the period the slower the chart, longer period charts tend to show more stable trends, shorter period charts tend to be used to pick entry and exit points.


Technical Indicators
There are many different types of technical indicators; however they can be grouped into five types.
1. Trend Indicators: As mentioned before trends show the persistence of price directions, either upwards, downwards or side wards. Trend indicators smooth out the historical prices to show market direction. The most common of these are Moving Averages. Simple trend lines can also be used to the same affect by drawing a line that joins the low and high points over a section of time; these are also used to form tunnels and triangles as popular analysis. Trend lines are also used to pick support and resistance levels.
2. Strength Indicators: This is essentially a volume indicator and more popular in futures markets then foreign exchange. The most popular of these is Volume.
3. Volatility: Measures and shows fluctuations over a section of time. These indicators help to pinpoint support and resistance levels, the most popular of these is Bollinger Bands.
4. Cycle: These indicators tend to find patterns or more correctly repetitious cycles. Once again more popular in other financial markets. The most popular Cycle indicator is the Elliot Wave.
5. Momentum or Oscillators: These indicators map the speed at which prices move over a given section of time. Momentum indicators determine the strength or weakness of a trend as it progresses over time. Momentum is highest at the beginning of a trend and lowest at trend turning points. Any divergence of directions in price and momentum is a warning of weakness; if price extremes occur with weak momentum, it signals an end of movement in that direction. If momentum is trending strongly and prices are flat, it signals a potential change in price direction. The most popular momentum indicators are the Stochastic, MACD and RSI.


Commonly used technical indicators
Moving Averages
Moving averages are trend indicators and are used by traders as a tool to verify existing trends, identify emerging trends and signify the end of trends. Moving averages are smooth lines that enable the trader to view long term price movements without the short term fluctuations.Of the three types of moving averages, the most common is the simple moving average; the other two are the weighted and exponential moving averages.
All the moving averages are calculated as the average of a specified number of either low, high or closing price of the period. The difference between the three types is the weighting or importance placed on each particular period. For example the weighted and exponential moving averages give greater importance to the latest prices whereas the simple gives equal importance to all the periods chosen.
Each new point of the moving average drops off the oldest period and brings in the newest period. A moving average line will change depending upon the number of periods chosen, the greater the number the slower the average. Some traders will play with a different number of moving averages all with different periods until they find a series of moving averages that they feel best indicate the behavior of the particular instrument being studied.
When choosing a moving average to work with, ideally in an upward trending market the current price should not fall beneath the moving average line chosen more then once. The moving average should form a support line during upward trends and a resistance during down trends. If the upward trend continues yet it breaks the moving average line on more then one occasion, then this is a good indication that the moving average line chosen is too fast, and has not been smoothed out enough. If for example a 30-day moving average was used then a 45-day moving average may be more appropriate for this particular instrument.
Once a trader is content with the behavior of the moving average line against the actual prices he may use the line to signify the continuation of a trend or the end of a trend. If the price closes below the moving average line on two occasions in an upward trending market – this is an indication of the end of the trend and time to exit a long position. The same logic follows in a downward trending market except in reverse; the current price needs to close above the moving average on two occasions to indicate that the downtrend is over.
Another way of using moving averages is in pairs. Many traders will first find the long-term moving average as described above and add a faster moving average (smaller period) as an even earlier indication of the end of a trend. I the shorter moving average crosses the slower moving average this may signal an earlier exit point for a trend.

Stochastics
The most commonly used stochastic is the slow stochastic. Stochastic oscillators are also used to determine either the strength of a trend or when the end of a trend is approaching. Stochastics are displayed by two lines known as %K (Faster) and %D (Slower) that oscillate between a scale ranging from 0 to 100.
The mathematics behind the oscillators is unimportant, what is important is the meaning and placement of the lines. When the lines cross above the 80 line, this is a representation of a strong upward trend, when they cross below the 20 line it is a representation of a strong downward trend. When the %K line crosses over the %D line this could be an indication of a change in the trend, and a possible exit point. When prices are fluctuating a normal appearance for the stochastics will be for them to be crossing over one another in mid range – here what is being shown is a lack of a trend.
The stochastics give their best signal when both the lines are moving to new ground at the same time as the actual price; this is a good indication of a continuation of a trend. However when the stochastics cross in a different direction of a prolonged trend this could be an indication to either exit or switch directions.

Relative Strength Index (RSI)
RSI is another momentum oscillator. RSI attempts to pick reversals in the trend. As with Stochastics they are read on a scale between 0 and 100. A Reading above 80 indicates an overbought market and readings below 20 indicate an oversold market. Trading on RSI's should occur only when there is a direction change above or below the 80 and 20 lines; as RSI lines can often remain above or below the 80, 20 levels for prolonged periods of time during strong trending markets.
The shorter the RSI period, the faster it will be and the more signals will be issued. Here a trader needs to find his balance. Day-traders will often use shorter lines for more regular signals and longer term traders will use longer RSI's.

Bollinger Bands
Bollinger Bands are volatility indicators and are used to identify extreme highs or lows in relation to the current price.
Bollinger Bands are based on a set number of standard deviations from the moving average. It essentially tries to indicate support and resistance levels or bands of expected trading.
As with the moving average, here too the trader can pick and adjust the moving average to base his Bollinger Bands on and the number of standard deviations to use. The trader can adjust these over time to suit his individual trading style. The default used is usual a 20-day moving average and two standard deviations from the moving average.
A break above or below the Bollinger Bands may show an exit point or a reversal.

Moving Average Convergence Divergence (MACD)
MACD is an enhanced study of the moving averages and behave as an oscillator. The MACD plots the difference between a 26-day exponential moving average and a 12-day exponential moving average. A 9-day moving average is generally used as a trigger line, meaning when the MACD crosses below this trigger it is a bearish signal and when it crosses above it, it's a bullish signal.
Traders use the MACD for trend reversals. For instance if the MACD indicator turns higher while prices are still falling this could be an exit point and a possible reverse trade.

Fibonacci Retracements
Fibonacci retracement levels are a sequence of numbers that indicate changes in trends from previous peaks or troughs. After a significant price move, prices will often retrace a significant portion of the original move. As prices retrace, support and resistance levels often occur at or near the Fibonacci retracement levels.
In the currency markets, the commonly used sequence of ratios is 23.6%, 38.2%, 50% and 61.8%. Fibonacci retracement levels are drawn by joining a trend line from a significant high point to a significant low point. The pullback simply represents a correction in the trend and not an end to the trend. The most significant pullbacks are the 38.2%, and 61.8% levels.

Technical Trading Guide

1. Chart the Trends and Range Bound Markets

Use long term charts to decide trends or range bound markets. Begin a chart analysis with daily, weekly and even monthly charts spanning several years if possible. A larger scale chart essentially shows the life of the market and provides clearer visibility and a better long-term perspective on a market. Once the long-term has been established, consult daily and intra-day charts, these charts can include anything from say 10 minute to daily charts. A short-term market view alone can often be deceptive. Even if you only trade the very short term, you will do better if you're trading in the same direction as the intermediate and longer-term trends. If there is no trend then a different strategy is necessary, possibly playing the range until the market begins to trend once more.
As can be seen in the 1-hour EUR/USD candle chart below there has been an uptrend with three peaks and three troughs. Long entry positions would at 1.2700, 1.2760 and 1.2800.


2. Follow the Trend
If you determine the trend, then follow it. Market trends come in a variety of terms - long-term, intermediate-term and short-term. The first thing you have to determine is what type of a trader are you, long term or day trader, that decision will determine which charts you should be using. For instance, if you're day trading, use the daily and intra-day charts, but always use the longer-range chart to determine the trend, and then use the shorter-term chart for timing. Make sure you trade in the direction of that trend and then buy on dips if the trend is up and sell on rallies if the trend is down.

3. Locate Support and Resistance Levels
Find the support and resistance levels. As above when you want to buy an instrument, its best to buy near support levels. The support is usually a previous reaction low. Using the same logic, the best place to sell an instrument would be near its resistance levels. The resistance level is usually a previous peak. After a resistance peak has been broken, it will usually provide support on subsequent pullbacks. In other words, the old high becomes the new low. In the same way, when a support level has been broken, it will usually produce selling on subsequent rallies - the old low can then become the new high.

4. Retracements
Measure retracements in percentage terms. Market corrections up or down often retrace a significant portion of the previous trend. One can measure the corrections in an existing trend in simple percentages. A fifty percent retracement of a prior trend is most common. A minimum retracement is usually one-third of the prior trend. The maximum retracement is usually two-thirds. Fibonacci retracements of 38% and 62% are also worth watching. Therefore popular buy points in an uptrend are usually between 33-38% retracement of the original trend.
As can be seen from the chart below, when joining the trough at 1.2750 to the peak at 1.2890 in the 1-hour EUR/USD chart we can see the Fibonacci levels drawn out. The first retracement ended at the 38% line and the major retracement at the 62% line.

5. Trend Lines
One of the simplest and most effective charting tools are trend lines – use them. Draw a straight line that join two points on the chart. Up trend lines are drawn along two successive lows and down trend lines are drawn along two successive peaks. Prices will often pull back to trend lines before resuming their trend. The breaking of trend lines often signals a change in a trend. The longer a trend line has been in effect, and the more times it has been tested, the more significant it becomes; a trend line becomes valid if it is touched at least three times.

6. Moving Averages
Moving averages often provide objective buy and sell signals, hence they should be watched. They show you if an existing trend is still in motion and help confirm a trend change. Do not rely on moving averages to tell you in advance if there is a trend change imminent; use it as a back-up to your chart analysis for trend identification. A combination chart of two moving averages is the most popular way of finding trading signals. Signals are given when the shorter average line crosses the longer. Price crossings above and below a 40-day and 200-day moving average also provide good trading signals. Since moving average chart lines are trend-following indicators, they work best in a trending market.
As can be seen in the EUR/USD 1-hour chart below the 5-period and 25-period moving averages project and confirm the trend in progress. The 5-period moving average crosses over the slower 25-period moving average at 1.2715 confirming the up-trend with an exit point at 1.2770. The same rate 1.2770 is another indication of a resume in the up-trend with an exit at 1.2850.

7. Oscillators
Oscillators help identify overbought and oversold markets. While moving averages offer confirmation of a trending market, oscillators can often warn us in advance that a market has rallied or fallen too far and will soon turn or retrace. Two of the most popular oscillators are the Relative Strength Index or RSI and the Stochastics. Both these oscillators work on a scale of 0 to 100. With the RSI, readings over 70 are overbought while readings below 30 are oversold. The overbought and oversold values for Stochastics are 80 and 20. Oscillator divergences often warn of market turns and as opposed to moving averages they work best in range bound markets. Weekly signals can be used as filters on daily signals. Daily signals can be used as filters for intra-day charts.
As can be seen in the EUR/USD 1-hour chart below, the Stochastics break through the 80-20 barriers and cross over themselves on corrections of the price. This occurs several times.


8. Know the Warning Signs
The Moving Average Convergence Divergence (MACD) indicator combines a moving average crossover system with the overbought/oversold elements of an oscillator. A buy signal occurs when the faster line crosses above the slower and both lines are below zero. A sell signal takes place when the faster line crosses below the slower from above the zero line. Longer-period signals take precedence over shorter-period signals. The MACD histogram plots the difference between the two lines and gives even earlier warnings of trend changes. It's called a histogram because vertical bars are used to show the difference between the two lines on the chart.
As can be seen in the EUR/USD 1-hour chart below, the MACD indicators cross over one another beneath the zero line to show a buy signal and vice versa for the sell signal. This occurs most prominently at 1.2760 to buy, 1.2870 to sell.

9. Trend or Range Bound Market
The Average Directional Movement Index (ADX) line helps determine whether a market is in a trending or range bound phase. It measures the degree of trend or direction in the market. A rising ADX line suggests the presence of a strong trend. A falling ADX line suggests the presence of a trading market and the absence of a trend. A rising ADX line favors moving averages; a falling ADX favors oscillators. By plotting the direction of the ADX line, the trader is able to determine which trading style and which set of indicators are most suitable for the current market environment.

10. Study
Technical analysis is a skill that improves with experience and study. The more you learn and practice the better you'll be, keep studying, fine tune methods, learn what works for you and what doesn't and remain technical and not emotional.

Fundamental Analysis – an Introduction

Fundamental analysis is the study of economic, social and political data that represents and quantifies the economy in question with the goal of determining future movements in a financial market.

Analysts have been grouped into either Technical of Fundamental camps for many years but if truth be told there are very few pure technicians or fundamentalists. Technical analysts cannot really ignore the effect and timing of economic announcements and fundamental analysts cannot really ignore various signals derived from the study of historic prices and volatility.

It is fairly difficult to take into account all the different economic announcements as well as the political and social situations that affect an economy particularly in today's global market, however by understanding the basics and delving deeper into the various fundamentals of the economies one will likely find that his understanding of the financial markets improves dramatically.

There are a myriad of economic announcements and while it may be important to be familiar with schedules and understand the nature and possible impact of the announcements it would be very easy to be too bogged down by the various information until such time as there is too much and one may simply not be able to come up with an effective basis for trading.

Because of the vast number of fundamentals out there, it may be more important to focus on the main price movers as a basis, rather then try to know a little about a lot.